Industry News

Lashing Chains Guide
by admin on 22-04-28
In the case of very heavy loads transport, it can be well convenient to secure the cargo by lashing chains approved according to the EN 12195-3 standard, instead of web lashings approved according to EN 12195-2 standard. This is to limit the number of lashings required, ...
Read more
Instructions For The Safe Use Of Chain Lashings
by admin on 22-04-28
This information is of a general nature only covering the main points for the safe use of Chain Lashings. It may be necessary to supplement this information for specific applications. See also the general guidance on load restraint, given overleaf. ...
Read more
How To Assemble A Chain Sling？
by admin on 22-04-04
Chain is often used to tie down loads, for lifting applications and to tow loads – however, the rigging industry’s safety standards have developed in recent years, and chain used for lifting must meet certain specifications. Chain slings are among some of the most popu...
Read more
What Is Chain Slings Inspection Guide? (Grade 80 and Grade 100 round link chain slings, with master links, shorteners, connecting links, sling hooks)
by admin on 22-04-03
Chain Slings Inspection Guide (Grade 80 and Grade 100 round link chain slings, with master links, shorteners, connecting links, sling hooks) ▶ Who should carry out chain slings inspection? The well trained and competent person shall...
Read more
Offshore Tank Container Rigging Failure
by admin on 22-02-18
(a reconsider on quality of master link / assembly for offshore container lifting sets) A member of IMCA has reported two incidents in which the rigging of an offshore tank container failed as a result of a cold fracture. In both cases a tank container w...
Read more
How Does A Bucket Elevator Work?
by admin on 22-02-17
Round Link Chain Bucket Elevator vs. Belt Bucket Elevator How Does A Bucket Elevator Work？ Bucket elevators are conveyors that carry bulk materials along an incli...
Read more
Get To Know Round Link Chains For Mining
by admin on 21-12-22
1. Story of round link chains for mining With the increasing demand for coal energy in the world economy, coal mining machinery has developed rapidly. As the main equipment of comprehensive mechanized coal mining in coal mine, the transmissio...
Read more
Lifting Round Link Chain Use, Inspection And Scrapping Guidance
by admin on 21-12-17
1. Lifting round link chain selection and use (1) Grade 80 welded lifting chain WLL and index Table 1: WLL with chain sling leg(s) angle of 0°~90° Link diameter (mm) Max. WLL Single leg t 2-...
Read more
How To Replace The Slag Extractor Conveyor Chains And Scrapers?
by admin on 21-12-02
The wear and elongation of the slag extractor conveyor chain not only brings safety risks, but also will shorten the service life of the slag extractor conveyor chain itself. Here below is an overview of the replacement of slag extractor conveyor chains and scrapers. ...
Read more
How To Pairing, Installation And Maintenance The Mining Flat Link Chains?
by admin on 21-09-06
How to Pairing, Installation and Maintenance the Mining Flat Link Chains? As a round steel link chain manufacturer for 30 years, we're glad to share the ways of Pairing, Installation and Maintenance the Mining Flat Link Chains. ...
Read more
How To Maintenance And Repair The Lifting Chain?
by admin on 21-07-17
1. There should be no skew and swing when the sprocket is installed on the shaft. In the same transmission assembly, the end faces of two sprockets should be in the same plane. When the center distance of sprockets is less than 0.5m, the allowable deviation is 1mm; When ...
Read more
What Is The Development Of Heat Treatment Process For High Grade Chain Steel 23MnNiMoCr54?
by admin on 21-06-15
Development of heat treatment process for high grade chain steel 23MnNiMoCr54 Heat treatment determines the quality and performance of round link chain steel, so reasonable and efficient heat treatment process is an effective method to ensure...
Read more