-
Lifting Round Link Chain Use, Inspection And Scrapping Guidance
1. Lifting round link chain selection and use (1) Grade 80 welded lifting chain WLL and index Table 1: WLL with chain sling leg(s) angle of 0°~90° Link diameter (mm) Max. WLL Single leg t 2-...Read more -
How To Replace The Slag Extractor Conveyor Chains And Scrapers?
The wear and elongation of the slag extractor conveyor chain not only brings safety risks, but also will shorten the service life of the slag extractor conveyor chain itself. Here below is an overview of the replacement of slag extractor conveyor chains and scrapers. ...Read more -
Lifting Chains 20x60mm Made with Alloy Steel 23MnNiMoCr54
SCIC chains for lifting are made as per EN 818-2 standards, with nickel chromium molybdenum manganese alloy steel per DIN 17115 standards; well designed / monitored welding & heat-treatment ensure chains mechanical properties including test force, breaking force, elo...Read more -
How To Pairing, Installation And Maintenance The Mining Flat Link Chains?
How to Pairing, Installation and Maintenance the Mining Flat Link Chains? As a round steel link chain manufacturer for 30 years, we're glad to share the ways of Pairing, Installation and Maintenance the Mining Flat Link Chains. ...Read more -
How To Maintenance And Repair The Lifting Chain?
1. There should be no skew and swing when the sprocket is installed on the shaft. In the same transmission assembly, the end faces of two sprockets should be in the same plane. When the center distance of sprockets is less than 0.5m, the allowable deviation is 1mm; When ...Read more -
What Is The Development Of Heat Treatment Process For High Grade Chain Steel 23MnNiMoCr54?
Development of heat treatment process for high grade chain steel 23MnNiMoCr54 Heat treatment determines the quality and performance of round link chain steel, so reasonable and efficient heat treatment process is an effective method to ensure...Read more -
A Brief Introduction Of Mining Round Link Steel Chain Production And Technology
Round link steel chain production process: Bar cutting → cold bending → jointing → welding → primary calibration → heat treatment → secondary calibration (proof) → inspection. Welding and heat treatment are the key...Read more -
Round Link Chains Of Different Means Of Painting, How And Why?
Normal Painting Electrostatic Spray Coating Electrophoretic Coating SCIC-chain has been supplying r...Read more -
Grade 100 Alloy Steel Chain
Grade 100 alloy steel chain / lifting chain: Grade 100 chain was specifically designed for the rigorous requirements of overhead lifting applications. Grade 100 Chain is a Premium quality high strength alloy steel. Grade 100 Chain has a 20 percent increase in working load limit as compared to a ...Read more -
SCIC Mining Chains For Delivery
round steel link chains with flat type links finished coating for mining armored face conveyor SCIC chains best for * hardness * strength * toleranceRead more -
Quality Alloy Steel Makes Quality Round Steel Link Chain
Read more -
SCIC Short Link Chain For Lifting
SCIC chains and fittings for lifting are manufactured according to the international ISO 3076-3056-4778-7593, to the European EN 818-1/2/4 and to the DIN 5587 DIN5688 standards. Chains and fittings are made of alloy steel of the highest quality exceeding the minimum characteristics prescribed by ...Read more
