Short Lead Time for Harrington 5 Ton Chain Hoist - Hoist Chains – Dia 10mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong
Short Lead Time for Harrington 5 Ton Chain Hoist - Hoist Chains – Dia 10mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong Detail:
Category
Application
Lifting and lashing, loads lifting, loads binding, hoisting
Chain Parameter
Based on SCIC G80 & G100 lifting chain production technology, we well extend our product line to fine tolerance hoist chain Grade T (Types T, DAT & DT), for use in serial chain hoists manual and power driven.
Figure 1: hoist chain / links
Key
| 1 | Traverse centre line of the link | l | is the multiple pitch length |
| p | is the pitch | dm | is the material diameter as measured |
| ds | is the weld diameter | e | is the length dimensionally affected by welding |
| w3 | is the internal width at the weld | w2 | is the external width over the weld |
Table 1: hoist chain / link dimensions (mm)
|
Nominal size dn |
Material diameter tolerance |
Pitch |
Width |
Gaugelengthof 11xpn |
Weld diameter ds max. |
|||
|
pn |
tolerance1) |
internal w3 min. |
external w2 max. |
l |
tolerance1) |
|||
|
4 |
±0.2 |
12 |
0.25 |
4.8 |
13.6 |
132 |
0.6 |
4.3 |
|
5 |
±0.2 |
15 |
0.3 |
6.0 |
17.0 |
165 |
0.8 |
5.4 |
|
6 |
±0.2 |
18 |
0.35 |
7.2 |
20.4 |
198 |
1.0 |
6.5 |
|
7 |
±0.3 |
21 |
0.4 |
8.4 |
23.8 |
231 |
1.1 |
7.6 |
|
8 |
±0.3 |
24 |
0.5 |
9.6 |
27.2 |
264 |
1.3 |
8.6 |
|
9 |
±0.4 |
27 |
0.5 |
10.8 |
30.6 |
297 |
1.4 |
9.7 |
|
10 |
±0.4 |
30 |
0.6 |
12.0 |
34.0 |
330 |
1.6 |
10.8 |
|
11 |
±0.4 |
33 |
0.6 |
13.2 |
37.4 |
363 |
1.7 |
11.9 |
|
12 |
±0.5 |
36 |
0.7 |
14.4 |
40.8 |
396 |
1.9 |
13.0 |
|
13 |
±0.5 |
39 |
0.8 |
15.6 |
44.2 |
429 |
2.1 |
14.0 |
|
14 |
±0.6 |
42 |
0.8 |
16.8 |
47.6 |
462 |
2.2 |
15.1 |
|
16 |
±0.6 |
48 |
0.9 |
19.2 |
54.4 |
528 |
2.5 |
17.3 |
|
18 |
±0.9 |
54 |
1.0 |
21.6 |
61.2 |
594 |
2.9 |
19.4 |
|
20 |
±1.0 |
60 |
1.2 |
24.0 |
68.0 |
660 |
3.2 |
21.6 |
|
22 |
±1.1 |
66 |
1.3 |
26.4 |
74.8 |
726 |
3.5 |
23.8 |
|
1)These tolerances are usually divided into +2/3 and –1/3 for both the individual link and the standard gauge length. |
||||||||
Table 2: hoist chain working load limit (WLL)
|
Nominal size dn mm |
Chain type T t |
Chain type DAT t |
Chain type DT t |
|
4 5 6 |
0.5 0.8 1.1 |
0.4 0.63 0.9 |
0.25 0.4 0.56 |
|
7 8 9 |
1.5 2 2.5 |
1.2 1.6 2 |
0.75 1 1.25 |
|
10 11 12 |
3.2 3.8 4.5 |
2.5 3 3.6 |
1.6 1.9 2.2 |
|
13 14 16 |
5.3 6 8 |
4.2 5 6.3 |
2.6 3 4 |
|
18 20 22 |
10 12.5 15 |
8 10 12.5 |
5 6.3 7.5 |
|
mean stress N/mm2 |
200 |
160 |
100 |
Table 3: hoist chain manufacturing proof forces and breaking forces
|
Nominal size dn mm |
Manufacturing proof force (MPF) kN min. |
Breaking force (BF) kN min. |
|
4 |
12.6 |
20.1 |
|
5 |
19.6 |
31.4 |
|
6 |
28.3 |
45.2 |
|
7 |
38.5 |
61.6 |
|
8 |
50.3 |
80.4 |
|
9 |
63.6 |
102 |
|
10 |
78.5 |
126 |
|
11 |
95 |
152 |
|
12 |
113 |
181 |
|
13 |
133 |
212 |
|
14 |
154 |
246 |
|
16 |
201 |
322 |
|
18 |
254 |
407 |
|
20 |
314 |
503 |
|
22 |
380 |
608 |
Table 4: total ultimate elongation and surface hardness
|
|
hoist chain types |
||
|
T |
DAT |
DT |
|
|
Total ultimate elongation A %min |
10 |
10 |
5 |
|
Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
Site Inspection
Our Service
Product detail pictures:
Related Product Guide:
"Control the standard by the details, show the toughness by quality". Our firm has strived to establish a highly efficient and stable workers workforce and explored an effective high-quality management system for Short Lead Time for Harrington 5 Ton Chain Hoist - Hoist Chains – Dia 10mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong, The product will supply to all over the world, such as: Jakarta, Belgium, Morocco, Due to good quality and reasonable prices, our products have been exported to more than 10 countries and regions. We are looking forward to cooperating with all customers from at home and abroad. Moreover, customer satisfaction is our eternal pursuit.
By Donna from Kuwait - 2018.12.25 12:43
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Caroline from panama - 2017.05.02 11:33
