Renewable Design for Cm 3 Ton Chain Hoist - hoist chain – Chigong

Short Description:

Product Detail

Product Tags

Feedback (2)

Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Italian Chain Links, Dragon Link Chain, G100 Chain, How about to start your good organization with our corporation? We are all set, properly trained and fulfilled with pride. Let’s start our new business enterprise with new wave.

Renewable Design for Cm 3 Ton Chain Hoist - hoist chain – Chigong Detail:

Application

Lifting and lashing, loads lifting, loads binding

Figure 1: hoist chain / links

Key

1	Traverse centre line of the link	l	is the multiple pitch length
p	is the pitch	dm	is the material diameter as measured
ds	is the weld diameter	e	is the length dimensionally affected by welding
w3	is the internal width at the weld		w2 is the external width over the weld

Table 1: hoist chain / link dimensions (mm)

Nominal size dn	Material diameter tolerance	Pitch		Width		Gauge length of 11 x pn		Weld diameter ds max.
Nominal size dn	Material diameter tolerance	pn	tolerance1)	internal w3 min.	external w2 max.	l	tolerance1)	Weld diameter ds max.
4	± 0,2	12	0,25	4,8	13,6	132	0,6	4,3
5	± 0,2	15	0,3	6,0	17,0	165	0,8	5,4
6	± 0,2	18	0,35	7,2	20,4	198	1,0	6,5
7	± 0,3	21	0,4	8,4	23,8	231	1,1	7,6
8	± 0,3	24	0,5	9,6	27,2	264	1,3	8,6
9	± 0,4	27	0,5	10,8	30,6	297	1,4	9,7
10	± 0,4	30	0,6	12,0	34,0	330	1,6	10,8
11	± 0,4	33	0,6	13,2	37,4	363	1,7	11,9
12	± 0,5	36	0,7	14,4	40,8	396	1,9	13,0
13	± 0,5	39	0,8	15,6	44,2	429	2,1	14,0
14	± 0,6	42	0,8	16,8	47,6	462	2,2	15,1
16	± 0,6	48	0,9	19,2	54,4	528	2,5	17,3
18	± 0,9	54	1,0	21,6	61,2	594	2,9	19,4
20	± 1,0	60	1,2	24,0	68,0	660	3,2	21,6
22	± 1,1	66	1,3	26,4	74,8	726	3,5	23,8
1) These tolerances are usually divided into + 2/3 and – 1/3 for both the individual link and the standard gauge length.

Table 2: hoist chain working load limit (WLL)

Nominal size dn

Chain type T

Chain type DAT

Chain type DT

0,5

0,8

1,1

0,4

0,63

0,9

0,25

0,4

0,56

1,5

2,5

1,2

1,6

0,75

1,25

3,2

3,8

4,5

2,5

3,6

1,6

1,9

2,2

5,3

4,2

6,3

2,6

12,5

6,3

7,5

mean stress N/mm2

200

160

100

Table 3: hoist chain manufacturing proof forces and breaking forces

Nominal size dn mm	Manufacturing proof force (MPF) kN min.	Breaking force (BF) kN min.
4	12,6	20,1
5	19,6	31,4
6	28,3	45,2
7	38,5	61,6
8	50,3	80,4
9	63,6	102
10	78,5	126
11	95	152
12	113	181
13	133	212
14	154	246
16	201	322
18	254	407
20	314	503
22	380	608

Table 4: total ultimate elongation and surface hardness

	hoist chain types
	T	DAT	DT
Total ultimate elongation A %min	10	10	5
Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10	360 360 360	500 500 450	550 550 500

Product detail pictures:

Related Product Guide:

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Renewable Design for Cm 3 Ton Chain Hoist - hoist chain – Chigong, The product will supply to all over the world, such as: Swansea, Iceland, St. Petersburg, Selling our products and solutions causes no risks and brings high returns to your company instead. It is our consistent pursuit to create value for clients. Our company is looking for agents sincerely. What are you waiting for? Come and join us. Now or never.

15 Ton Chain Hoist