New Fashion Design for Harrington 2 Ton Electric Chain Hoist - Hoist Chains – Dia 5mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong
New Fashion Design for Harrington 2 Ton Electric Chain Hoist - Hoist Chains – Dia 5mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong Detail:
Category
Application
Lifting and lashing, loads lifting, loads binding, hoisting
Chain Parameter
Based on SCIC G80 & G100 lifting chain production technology, we well extend our product line to fine tolerance hoist chain Grade T (Types T, DAT & DT), for use in serial chain hoists manual and power driven.
Figure 1: hoist chain / links
Key
| 1 | Traverse centre line of the link | l | is the multiple pitch length |
| p | is the pitch | dm | is the material diameter as measured |
| ds | is the weld diameter | e | is the length dimensionally affected by welding |
| w3 | is the internal width at the weld | w2 | is the external width over the weld |
Table 1: hoist chain / link dimensions (mm)
|
Nominal size dn |
Material diameter tolerance |
Pitch |
Width |
Gaugelengthof 11xpn |
Weld diameter ds max. |
|||
|
pn |
tolerance1) |
internal w3 min. |
external w2 max. |
l |
tolerance1) |
|||
|
4 |
±0.2 |
12 |
0.25 |
4.8 |
13.6 |
132 |
0.6 |
4.3 |
|
5 |
±0.2 |
15 |
0.3 |
6.0 |
17.0 |
165 |
0.8 |
5.4 |
|
6 |
±0.2 |
18 |
0.35 |
7.2 |
20.4 |
198 |
1.0 |
6.5 |
|
7 |
±0.3 |
21 |
0.4 |
8.4 |
23.8 |
231 |
1.1 |
7.6 |
|
8 |
±0.3 |
24 |
0.5 |
9.6 |
27.2 |
264 |
1.3 |
8.6 |
|
9 |
±0.4 |
27 |
0.5 |
10.8 |
30.6 |
297 |
1.4 |
9.7 |
|
10 |
±0.4 |
30 |
0.6 |
12.0 |
34.0 |
330 |
1.6 |
10.8 |
|
11 |
±0.4 |
33 |
0.6 |
13.2 |
37.4 |
363 |
1.7 |
11.9 |
|
12 |
±0.5 |
36 |
0.7 |
14.4 |
40.8 |
396 |
1.9 |
13.0 |
|
13 |
±0.5 |
39 |
0.8 |
15.6 |
44.2 |
429 |
2.1 |
14.0 |
|
14 |
±0.6 |
42 |
0.8 |
16.8 |
47.6 |
462 |
2.2 |
15.1 |
|
16 |
±0.6 |
48 |
0.9 |
19.2 |
54.4 |
528 |
2.5 |
17.3 |
|
18 |
±0.9 |
54 |
1.0 |
21.6 |
61.2 |
594 |
2.9 |
19.4 |
|
20 |
±1.0 |
60 |
1.2 |
24.0 |
68.0 |
660 |
3.2 |
21.6 |
|
22 |
±1.1 |
66 |
1.3 |
26.4 |
74.8 |
726 |
3.5 |
23.8 |
|
1)These tolerances are usually divided into +2/3 and –1/3 for both the individual link and the standard gauge length. |
||||||||
Table 2: hoist chain working load limit (WLL)
|
Nominal size dn mm |
Chain type T t |
Chain type DAT t |
Chain type DT t |
|
4 5 6 |
0.5 0.8 1.1 |
0.4 0.63 0.9 |
0.25 0.4 0.56 |
|
7 8 9 |
1.5 2 2.5 |
1.2 1.6 2 |
0.75 1 1.25 |
|
10 11 12 |
3.2 3.8 4.5 |
2.5 3 3.6 |
1.6 1.9 2.2 |
|
13 14 16 |
5.3 6 8 |
4.2 5 6.3 |
2.6 3 4 |
|
18 20 22 |
10 12.5 15 |
8 10 12.5 |
5 6.3 7.5 |
|
mean stress N/mm2 |
200 |
160 |
100 |
Table 3: hoist chain manufacturing proof forces and breaking forces
|
Nominal size dn mm |
Manufacturing proof force (MPF) kN min. |
Breaking force (BF) kN min. |
|
4 |
12.6 |
20.1 |
|
5 |
19.6 |
31.4 |
|
6 |
28.3 |
45.2 |
|
7 |
38.5 |
61.6 |
|
8 |
50.3 |
80.4 |
|
9 |
63.6 |
102 |
|
10 |
78.5 |
126 |
|
11 |
95 |
152 |
|
12 |
113 |
181 |
|
13 |
133 |
212 |
|
14 |
154 |
246 |
|
16 |
201 |
322 |
|
18 |
254 |
407 |
|
20 |
314 |
503 |
|
22 |
380 |
608 |
Table 4: total ultimate elongation and surface hardness
|
|
hoist chain types |
||
|
T |
DAT |
DT |
|
|
Total ultimate elongation A %min |
10 |
10 |
5 |
|
Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
Site Inspection
Our Service
Product detail pictures:
Related Product Guide:
Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for New Fashion Design for Harrington 2 Ton Electric Chain Hoist - Hoist Chains – Dia 5mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong, The product will supply to all over the world, such as: Albania, Belgium, Oman, We have more than 200 staff including experienced managers, creative designers, sophisticated engineers and skilled workers. Through hard work of all employees for the past 20 years own company grew stronger and stronger. We always apply the "client first" principle. We also always fulfill all contracts to the point and therefore enjoy excellent reputation and trust among our customers. You are very welcome to personally visit our company.We hope to start a business partnership on the basis of mutual benefit and successful development . For more information please do no hesitate to contact us..
By Daniel Coppin from French - 2017.11.12 12:31
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Amy from Netherlands - 2017.06.22 12:49
