Massive Selection for Hoisting And Hauling Chain - hoist chain – Chigong

Short Description:

Product Detail

Product Tags

Feedback (2)

We will devote ourselves to providing our esteemed customers with the most enthusiastically thoughtful services for Hoisting Wire Rope And Sling, Grade 80 Alloy Steel, S Link Chain, Should you be fascinated in any of our products and services, remember to do not hesitate to make contact with us. We're ready to reply you inside of 24 several hours soon after receipt of one's ask for and also to develop mutual un-limited advantages and organization in around potential.

Massive Selection for Hoisting And Hauling Chain - hoist chain – Chigong Detail:

Application

Lifting and lashing, loads lifting, loads binding

Figure 1: hoist chain / links

Key

1	Traverse centre line of the link	l	is the multiple pitch length
p	is the pitch	dm	is the material diameter as measured
ds	is the weld diameter	e	is the length dimensionally affected by welding
w3	is the internal width at the weld		w2 is the external width over the weld

Table 1: hoist chain / link dimensions (mm)

Nominal size dn	Material diameter tolerance	Pitch		Width		Gauge length of 11 x pn		Weld diameter ds max.
Nominal size dn	Material diameter tolerance	pn	tolerance1)	internal w3 min.	external w2 max.	l	tolerance1)	Weld diameter ds max.
4	± 0,2	12	0,25	4,8	13,6	132	0,6	4,3
5	± 0,2	15	0,3	6,0	17,0	165	0,8	5,4
6	± 0,2	18	0,35	7,2	20,4	198	1,0	6,5
7	± 0,3	21	0,4	8,4	23,8	231	1,1	7,6
8	± 0,3	24	0,5	9,6	27,2	264	1,3	8,6
9	± 0,4	27	0,5	10,8	30,6	297	1,4	9,7
10	± 0,4	30	0,6	12,0	34,0	330	1,6	10,8
11	± 0,4	33	0,6	13,2	37,4	363	1,7	11,9
12	± 0,5	36	0,7	14,4	40,8	396	1,9	13,0
13	± 0,5	39	0,8	15,6	44,2	429	2,1	14,0
14	± 0,6	42	0,8	16,8	47,6	462	2,2	15,1
16	± 0,6	48	0,9	19,2	54,4	528	2,5	17,3
18	± 0,9	54	1,0	21,6	61,2	594	2,9	19,4
20	± 1,0	60	1,2	24,0	68,0	660	3,2	21,6
22	± 1,1	66	1,3	26,4	74,8	726	3,5	23,8
1) These tolerances are usually divided into + 2/3 and – 1/3 for both the individual link and the standard gauge length.

Table 2: hoist chain working load limit (WLL)

Nominal size dn

Chain type T

Chain type DAT

Chain type DT

0,5

0,8

1,1

0,4

0,63

0,9

0,25

0,4

0,56

1,5

2,5

1,2

1,6

0,75

1,25

3,2

3,8

4,5

2,5

3,6

1,6

1,9

2,2

5,3

4,2

6,3

2,6

12,5

6,3

7,5

mean stress N/mm2

200

160

100

Table 3: hoist chain manufacturing proof forces and breaking forces

Nominal size dn mm	Manufacturing proof force (MPF) kN min.	Breaking force (BF) kN min.
4	12,6	20,1
5	19,6	31,4
6	28,3	45,2
7	38,5	61,6
8	50,3	80,4
9	63,6	102
10	78,5	126
11	95	152
12	113	181
13	133	212
14	154	246
16	201	322
18	254	407
20	314	503
22	380	608

Table 4: total ultimate elongation and surface hardness

	hoist chain types
	T	DAT	DT
Total ultimate elongation A %min	10	10	5
Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10	360 360 360	500 500 450	550 550 500

Product detail pictures:

Related Product Guide:

We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for Massive Selection for Hoisting And Hauling Chain - hoist chain – Chigong, The product will supply to all over the world, such as: Croatia, UK, Tajikistan, Each customer's satisfactory is our goal. We are looking for long-term cooperation with each customer. To meet this, we keep up our quality and provide extraordinary customer service. Welcome to our company, we are expecting to cooperate with you.

1.5 Ton Electric Chain Hoist