Manufacturer of 10 Ton Electric Chain Hoist - Hoist Chains – Dia 7mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong

Short Description:

Product Detail

Product Tags

Feedback (2)

We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for 3 Tonne Chain Block, Wire Lifting Slings, Mining Link Chain, If you have the requirement for any of our products, please contact us now. We are looking forward to hearing from you soon.

Manufacturer of 10 Ton Electric Chain Hoist - Hoist Chains – Dia 7mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong Detail:

SCIC Lifting Chain

Application

Lifting and lashing, loads lifting, loads binding, hoisting

Grade 80 Lifting Chain

Grade 8 Lifting chain

Chain Parameter

Based on SCIC G80 & G100 lifting chain production technology, we well extend our product line to fine tolerance hoist chain Grade T (Types T, DAT & DT), for use in serial chain hoists manual and power driven.

Figure 1: hoist chain / links

Key

1	Traverse centre line of the link	l	is the multiple pitch length
p	is the pitch	dm	is the material diameter as measured
ds	is the weld diameter	e	is the length dimensionally affected by welding
w3	is the internal width at the weld	w2	is the external width over the weld

Table 1: hoist chain / link dimensions (mm)

Nominal size dn	Material diameter tolerance	Pitch		Width		Gaugelengthof 11xpn		Weld diameter ds max.
Nominal size dn	Material diameter tolerance	pn	tolerance1)	internal w3 min.	external w2 max.	l	tolerance1)	Weld diameter ds max.
4	±0.2	12	0.25	4.8	13.6	132	0.6	4.3
5	±0.2	15	0.3	6.0	17.0	165	0.8	5.4
6	±0.2	18	0.35	7.2	20.4	198	1.0	6.5
7	±0.3	21	0.4	8.4	23.8	231	1.1	7.6
8	±0.3	24	0.5	9.6	27.2	264	1.3	8.6
9	±0.4	27	0.5	10.8	30.6	297	1.4	9.7
10	±0.4	30	0.6	12.0	34.0	330	1.6	10.8
11	±0.4	33	0.6	13.2	37.4	363	1.7	11.9
12	±0.5	36	0.7	14.4	40.8	396	1.9	13.0
13	±0.5	39	0.8	15.6	44.2	429	2.1	14.0
14	±0.6	42	0.8	16.8	47.6	462	2.2	15.1
16	±0.6	48	0.9	19.2	54.4	528	2.5	17.3
18	±0.9	54	1.0	21.6	61.2	594	2.9	19.4
20	±1.0	60	1.2	24.0	68.0	660	3.2	21.6
22	±1.1	66	1.3	26.4	74.8	726	3.5	23.8
1)These tolerances are usually divided into +2/3 and –1/3 for both the individual link and the standard gauge length.

Table 2: hoist chain working load limit (WLL)

Nominal size dn

Chain type T

Chain type DAT

Chain type DT

0.5

0.8

1.1

0.4

0.63

0.9

0.25

0.4

0.56

1.5

2.5

1.2

1.6

0.75

1.25

3.2

3.8

4.5

2.5

3.6

1.6

1.9

2.2

5.3

4.2

6.3

2.6

12.5

6.3

7.5

mean stress N/mm2

200

160

100

Table 3: hoist chain manufacturing proof forces and breaking forces

Nominal size dn mm	Manufacturing proof force (MPF) kN min.	Breaking force (BF) kN min.
4	12.6	20.1
5	19.6	31.4
6	28.3	45.2
7	38.5	61.6
8	50.3	80.4
9	63.6	102
10	78.5	126
11	95	152
12	113	181
13	133	212
14	154	246
16	201	322
18	254	407
20	314	503
22	380	608

Table 4: total ultimate elongation and surface hardness

	hoist chain types
	T	DAT	DT
Total ultimate elongation A %min	10	10	5
Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10	360 360 360	500 500 450	550 550 500

Site Inspection

scic round steel link chain

Our Service

scic round steel link chain

Product detail pictures:

Related Product Guide:

With this motto in mind, we have become one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for Manufacturer of 10 Ton Electric Chain Hoist - Hoist Chains – Dia 7mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong, The product will supply to all over the world, such as: Iraq, Uganda, Jordan, Now we've been sincerely consider to grant brand agent in different areas and our agents' maximum margin of profit is the most important thing we care about. Welcome all of the friends and customers to join us. We have been ready to share win-win corporation.

4 Ton Chain Hoist