Low price for D8+ Chain Hoist - Hoist Chain – Chigong

Short Description:

Product Detail

Product Tags

Feedback (2)

We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Chain Fall Hoist, Type T Hoist Lifting Chain, G8 Chain Slings, We always welcome new and old customers presents us with valuable advice and proposals for cooperation, let us grow and develop together, and to contribute to our community and staff!

Low price for D8+ Chain Hoist - Hoist Chain – Chigong Detail:

Application

Lifting and lashing, loads lifting, loads binding

Figure 1: hoist chain / links

Key

1	Traverse centre line of the link	l	is the multiple pitch length
p	is the pitch	dm	is the material diameter as measured
ds	is the weld diameter	e	is the length dimensionally affected by welding
w3	is the internal width at the weld	w2	is the external width over the weld

Table 1: hoist chain / link dimensions (mm)

Nominal size dn	Material diameter tolerance	Pitch		Width		Gauge length of 11 x pn		Weld diameter ds max.
Nominal size dn	Material diameter tolerance	pn	tolerance1)	internal w3 min.	external w2 max.	l	tolerance1)	Weld diameter ds max.
4	± 0.2	12	0.25	4.8	13.6	132	0.6	4.3
5	± 0.2	15	0.3	6.0	17.0	165	0.8	5.4
6	± 0.2	18	0.35	7.2	20.4	198	1.0	6.5
7	± 0.3	21	0.4	8.4	23.8	231	1.1	7.6
8	± 0.3	24	0.5	9.6	27.2	264	1.3	8.6
9	± 0.4	27	0.5	10.8	30.6	297	1.4	9.7
10	± 0.4	30	0.6	12.0	34.0	330	1.6	10.8
11	± 0.4	33	0.6	13.2	37.4	363	1.7	11.9
12	± 0.5	36	0.7	14.4	40.8	396	1.9	13.0
13	± 0.5	39	0.8	15.6	44.2	429	2.1	14.0
14	± 0.6	42	0.8	16.8	47.6	462	2.2	15.1
16	± 0.6	48	0.9	19.2	54.4	528	2.5	17.3
18	± 0.9	54	1.0	21.6	61.2	594	2.9	19.4
20	± 1.0	60	1.2	24.0	68.0	660	3.2	21.6
22	± 1.1	66	1.3	26.4	74.8	726	3.5	23.8
1) These tolerances are usually divided into + 2/3 and – 1/3 for both the individual link and the standard gauge length.

Table 2: hoist chain working load limit (WLL)

Nominal size dn

Chain type T

Chain type DAT

Chain type DT

0.5

0.8

1.1

0.4

0.63

0.9

0.25

0.4

0.56

1.5

2.5

1.2

1.6

0.75

1.25

3.2

3.8

4.5

2.5

3.6

1.6

1.9

2.2

5.3

4.2

6.3

2.6

12.5

6.3

7.5

mean stress N/mm2

200

160

100

Table 3: hoist chain manufacturing proof forces and breaking forces

Nominal size dn mm	Manufacturing proof force (MPF) kN min.	Breaking force (BF) kN min.
4	12.6	20.1
5	19.6	31.4
6	28.3	45.2
7	38.5	61.6
8	50.3	80.4
9	63.6	102
10	78.5	126
11	95	152
12	113	181
13	133	212
14	154	246
16	201	322
18	254	407
20	314	503
22	380	608

Table 4: total ultimate elongation and surface hardness

	hoist chain types
	T	DAT	DT
Total ultimate elongation A %min	10	10	5
Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10	360 360 360	500 500 450	550 550 500

Product detail pictures:

Related Product Guide:

With advanced technologies and facilities, strict quality control, reasonable price, superior service and close co-operation with customers, we are devoted to providing the best value for our customers for Low price for D8+ Chain Hoist - Hoist Chain – Chigong, The product will supply to all over the world, such as: Australia, Bahrain, Colombia, The development of our company not only needs the guarantee of quality, reasonable price and perfect service, but also relies on our customer's trust and support! In the future, we are going to continue with the most qualified and high quality service to offer the most competitive price, Together with our customers and achieve win-win! Welcome to inquiry and consult!

1000 Lb Chain Hoist