Good Quality Small Electric Chain Hoist - Hoist Chains – Dia 4mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong
Good Quality Small Electric Chain Hoist - Hoist Chains – Dia 4mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong Detail:
Category
Application
Lifting and lashing, loads lifting, loads binding, hoisting
Chain Parameter
Based on SCIC G80 & G100 lifting chain production technology, we well extend our product line to fine tolerance hoist chain Grade T (Types T, DAT & DT), for use in serial chain hoists manual and power driven.
Figure 1: hoist chain / links
Key
| 1 | Traverse centre line of the link | l | is the multiple pitch length |
| p | is the pitch | dm | is the material diameter as measured |
| ds | is the weld diameter | e | is the length dimensionally affected by welding |
| w3 | is the internal width at the weld | w2 | is the external width over the weld |
Table 1: hoist chain / link dimensions (mm)
|
Nominal size dn |
Material diameter tolerance |
Pitch |
Width |
Gaugelengthof 11xpn |
Weld diameter ds max. |
|||
|
pn |
tolerance1) |
internal w3 min. |
external w2 max. |
l |
tolerance1) |
|||
|
4 |
±0.2 |
12 |
0.25 |
4.8 |
13.6 |
132 |
0.6 |
4.3 |
|
5 |
±0.2 |
15 |
0.3 |
6.0 |
17.0 |
165 |
0.8 |
5.4 |
|
6 |
±0.2 |
18 |
0.35 |
7.2 |
20.4 |
198 |
1.0 |
6.5 |
|
7 |
±0.3 |
21 |
0.4 |
8.4 |
23.8 |
231 |
1.1 |
7.6 |
|
8 |
±0.3 |
24 |
0.5 |
9.6 |
27.2 |
264 |
1.3 |
8.6 |
|
9 |
±0.4 |
27 |
0.5 |
10.8 |
30.6 |
297 |
1.4 |
9.7 |
|
10 |
±0.4 |
30 |
0.6 |
12.0 |
34.0 |
330 |
1.6 |
10.8 |
|
11 |
±0.4 |
33 |
0.6 |
13.2 |
37.4 |
363 |
1.7 |
11.9 |
|
12 |
±0.5 |
36 |
0.7 |
14.4 |
40.8 |
396 |
1.9 |
13.0 |
|
13 |
±0.5 |
39 |
0.8 |
15.6 |
44.2 |
429 |
2.1 |
14.0 |
|
14 |
±0.6 |
42 |
0.8 |
16.8 |
47.6 |
462 |
2.2 |
15.1 |
|
16 |
±0.6 |
48 |
0.9 |
19.2 |
54.4 |
528 |
2.5 |
17.3 |
|
18 |
±0.9 |
54 |
1.0 |
21.6 |
61.2 |
594 |
2.9 |
19.4 |
|
20 |
±1.0 |
60 |
1.2 |
24.0 |
68.0 |
660 |
3.2 |
21.6 |
|
22 |
±1.1 |
66 |
1.3 |
26.4 |
74.8 |
726 |
3.5 |
23.8 |
|
1)These tolerances are usually divided into +2/3 and –1/3 for both the individual link and the standard gauge length. |
||||||||
Table 2: hoist chain working load limit (WLL)
|
Nominal size dn mm |
Chain type T t |
Chain type DAT t |
Chain type DT t |
|
4 5 6 |
0.5 0.8 1.1 |
0.4 0.63 0.9 |
0.25 0.4 0.56 |
|
7 8 9 |
1.5 2 2.5 |
1.2 1.6 2 |
0.75 1 1.25 |
|
10 11 12 |
3.2 3.8 4.5 |
2.5 3 3.6 |
1.6 1.9 2.2 |
|
13 14 16 |
5.3 6 8 |
4.2 5 6.3 |
2.6 3 4 |
|
18 20 22 |
10 12.5 15 |
8 10 12.5 |
5 6.3 7.5 |
|
mean stress N/mm2 |
200 |
160 |
100 |
Table 3: hoist chain manufacturing proof forces and breaking forces
|
Nominal size dn mm |
Manufacturing proof force (MPF) kN min. |
Breaking force (BF) kN min. |
|
4 |
12.6 |
20.1 |
|
5 |
19.6 |
31.4 |
|
6 |
28.3 |
45.2 |
|
7 |
38.5 |
61.6 |
|
8 |
50.3 |
80.4 |
|
9 |
63.6 |
102 |
|
10 |
78.5 |
126 |
|
11 |
95 |
152 |
|
12 |
113 |
181 |
|
13 |
133 |
212 |
|
14 |
154 |
246 |
|
16 |
201 |
322 |
|
18 |
254 |
407 |
|
20 |
314 |
503 |
|
22 |
380 |
608 |
Table 4: total ultimate elongation and surface hardness
|
|
hoist chain types |
||
|
T |
DAT |
DT |
|
|
Total ultimate elongation A %min |
10 |
10 |
5 |
|
Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
Site Inspection
Our Service
Product detail pictures:
Related Product Guide:
Our firm sticks to the basic principle of "Quality is the life of your company, and status will be the soul of it" for Good Quality Small Electric Chain Hoist - Hoist Chains – Dia 4mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong, The product will supply to all over the world, such as: Anguilla, panama, Burundi, We warmly welcome your patronage and will serve our clients both at home and abroad with products of superior quality and excellent service geared to the trend of further development as always. We believe you will benefit from our professionalism soon.
By Dinah from Bangkok - 2017.04.08 14:55
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Hedda from French - 2017.01.11 17:15
