Good Quality Chain Hoist Trolley - Hoist Chains – Dia 8mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong

Short Description:

Product Detail

Product Tags

Feedback (2)

Our advantages are reduced prices,dynamic product sales workforce,specialized QC,solid factories,superior quality services for G10 Round Steel Link Chain, Cable Lifting Slings, Chain Link Chain, We welcome new and old clients from all walks of lifestyle to speak to us for potential organization relationships and mutual success!

Good Quality Chain Hoist Trolley - Hoist Chains – Dia 8mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong Detail:

SCIC Lifting Chain

Application

Lifting and lashing, loads lifting, loads binding, hoisting

Grade 80 Lifting Chain

Grade 8 Lifting chain

Chain Parameter

Based on SCIC G80 & G100 lifting chain production technology, we well extend our product line to fine tolerance hoist chain Grade T (Types T, DAT & DT), for use in serial chain hoists manual and power driven.

Figure 1: hoist chain / links

Key

1	Traverse centre line of the link	l	is the multiple pitch length
p	is the pitch	dm	is the material diameter as measured
ds	is the weld diameter	e	is the length dimensionally affected by welding
w3	is the internal width at the weld	w2	is the external width over the weld

Table 1: hoist chain / link dimensions (mm)

Nominal size dn	Material diameter tolerance	Pitch		Width		Gaugelengthof 11xpn		Weld diameter ds max.
Nominal size dn	Material diameter tolerance	pn	tolerance1)	internal w3 min.	external w2 max.	l	tolerance1)	Weld diameter ds max.
4	±0.2	12	0.25	4.8	13.6	132	0.6	4.3
5	±0.2	15	0.3	6.0	17.0	165	0.8	5.4
6	±0.2	18	0.35	7.2	20.4	198	1.0	6.5
7	±0.3	21	0.4	8.4	23.8	231	1.1	7.6
8	±0.3	24	0.5	9.6	27.2	264	1.3	8.6
9	±0.4	27	0.5	10.8	30.6	297	1.4	9.7
10	±0.4	30	0.6	12.0	34.0	330	1.6	10.8
11	±0.4	33	0.6	13.2	37.4	363	1.7	11.9
12	±0.5	36	0.7	14.4	40.8	396	1.9	13.0
13	±0.5	39	0.8	15.6	44.2	429	2.1	14.0
14	±0.6	42	0.8	16.8	47.6	462	2.2	15.1
16	±0.6	48	0.9	19.2	54.4	528	2.5	17.3
18	±0.9	54	1.0	21.6	61.2	594	2.9	19.4
20	±1.0	60	1.2	24.0	68.0	660	3.2	21.6
22	±1.1	66	1.3	26.4	74.8	726	3.5	23.8
1)These tolerances are usually divided into +2/3 and –1/3 for both the individual link and the standard gauge length.

Table 2: hoist chain working load limit (WLL)

Nominal size dn

Chain type T

Chain type DAT

Chain type DT

0.5

0.8

1.1

0.4

0.63

0.9

0.25

0.4

0.56

1.5

2.5

1.2

1.6

0.75

1.25

3.2

3.8

4.5

2.5

3.6

1.6

1.9

2.2

5.3

4.2

6.3

2.6

12.5

6.3

7.5

mean stress N/mm2

200

160

100

Table 3: hoist chain manufacturing proof forces and breaking forces

Nominal size dn mm	Manufacturing proof force (MPF) kN min.	Breaking force (BF) kN min.
4	12.6	20.1
5	19.6	31.4
6	28.3	45.2
7	38.5	61.6
8	50.3	80.4
9	63.6	102
10	78.5	126
11	95	152
12	113	181
13	133	212
14	154	246
16	201	322
18	254	407
20	314	503
22	380	608

Table 4: total ultimate elongation and surface hardness

	hoist chain types
	T	DAT	DT
Total ultimate elongation A %min	10	10	5
Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10	360 360 360	500 500 450	550 550 500

Site Inspection

scic round steel link chain

Our Service

scic round steel link chain

Product detail pictures:

Related Product Guide:

As for competitive selling prices, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we are the lowest around for Good Quality Chain Hoist Trolley - Hoist Chains – Dia 8mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong, The product will supply to all over the world, such as: Kuwait, Sao Paulo, Palestine, Strict quality control is executed in each link of the whole production process.We sincerely hope to establish the friendly and mutual-beneficial cooperation with you. Based on high quality products and perfect pre-sales /after-sales service is our idea, some clients had cooperated with us for more than 5 years.

1 Ton Electric Chain Hoist