Factory Cheap Air Powered Chain Hoist - Hoist Chains – Dia 18mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong
Factory Cheap Air Powered Chain Hoist - Hoist Chains – Dia 18mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong Detail:
Category
Application
Lifting and lashing, loads lifting, loads binding, hoisting
Chain Parameter
Based on SCIC G80 & G100 lifting chain production technology, we well extend our product line to fine tolerance hoist chain Grade T (Types T, DAT & DT), for use in serial chain hoists manual and power driven.
Figure 1: hoist chain / links
Key
1 | Traverse centre line of the link | l | is the multiple pitch length |
p | is the pitch | dm | is the material diameter as measured |
ds | is the weld diameter | e | is the length dimensionally affected by welding |
w3 | is the internal width at the weld | w2 | is the external width over the weld |
Table 1: hoist chain / link dimensions (mm)
Nominal size dn |
Material diameter tolerance |
Pitch |
Width |
Gaugelengthof 11xpn |
Weld diameter ds max. |
|||
pn |
tolerance1) |
internal w3 min. |
external w2 max. |
l |
tolerance1) |
|||
4 |
±0.2 |
12 |
0.25 |
4.8 |
13.6 |
132 |
0.6 |
4.3 |
5 |
±0.2 |
15 |
0.3 |
6.0 |
17.0 |
165 |
0.8 |
5.4 |
6 |
±0.2 |
18 |
0.35 |
7.2 |
20.4 |
198 |
1.0 |
6.5 |
7 |
±0.3 |
21 |
0.4 |
8.4 |
23.8 |
231 |
1.1 |
7.6 |
8 |
±0.3 |
24 |
0.5 |
9.6 |
27.2 |
264 |
1.3 |
8.6 |
9 |
±0.4 |
27 |
0.5 |
10.8 |
30.6 |
297 |
1.4 |
9.7 |
10 |
±0.4 |
30 |
0.6 |
12.0 |
34.0 |
330 |
1.6 |
10.8 |
11 |
±0.4 |
33 |
0.6 |
13.2 |
37.4 |
363 |
1.7 |
11.9 |
12 |
±0.5 |
36 |
0.7 |
14.4 |
40.8 |
396 |
1.9 |
13.0 |
13 |
±0.5 |
39 |
0.8 |
15.6 |
44.2 |
429 |
2.1 |
14.0 |
14 |
±0.6 |
42 |
0.8 |
16.8 |
47.6 |
462 |
2.2 |
15.1 |
16 |
±0.6 |
48 |
0.9 |
19.2 |
54.4 |
528 |
2.5 |
17.3 |
18 |
±0.9 |
54 |
1.0 |
21.6 |
61.2 |
594 |
2.9 |
19.4 |
20 |
±1.0 |
60 |
1.2 |
24.0 |
68.0 |
660 |
3.2 |
21.6 |
22 |
±1.1 |
66 |
1.3 |
26.4 |
74.8 |
726 |
3.5 |
23.8 |
1)These tolerances are usually divided into +2/3 and –1/3 for both the individual link and the standard gauge length. |
Table 2: hoist chain working load limit (WLL)
Nominal size dn mm |
Chain type T t |
Chain type DAT t |
Chain type DT t |
4 5 6 |
0.5 0.8 1.1 |
0.4 0.63 0.9 |
0.25 0.4 0.56 |
7 8 9 |
1.5 2 2.5 |
1.2 1.6 2 |
0.75 1 1.25 |
10 11 12 |
3.2 3.8 4.5 |
2.5 3 3.6 |
1.6 1.9 2.2 |
13 14 16 |
5.3 6 8 |
4.2 5 6.3 |
2.6 3 4 |
18 20 22 |
10 12.5 15 |
8 10 12.5 |
5 6.3 7.5 |
mean stress N/mm2 |
200 |
160 |
100 |
Table 3: hoist chain manufacturing proof forces and breaking forces
Nominal size dn mm |
Manufacturing proof force (MPF) kN min. |
Breaking force (BF) kN min. |
4 |
12.6 |
20.1 |
5 |
19.6 |
31.4 |
6 |
28.3 |
45.2 |
7 |
38.5 |
61.6 |
8 |
50.3 |
80.4 |
9 |
63.6 |
102 |
10 |
78.5 |
126 |
11 |
95 |
152 |
12 |
113 |
181 |
13 |
133 |
212 |
14 |
154 |
246 |
16 |
201 |
322 |
18 |
254 |
407 |
20 |
314 |
503 |
22 |
380 |
608 |
Table 4: total ultimate elongation and surface hardness
|
hoist chain types |
||
T |
DAT |
DT |
|
Total ultimate elongation A %min |
10 |
10 |
5 |
Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
Site Inspection
Our Service
Product detail pictures:


Related Product Guide:
Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for Factory Cheap Air Powered Chain Hoist - Hoist Chains – Dia 18mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong, The product will supply to all over the world, such as: Bogota, Johannesburg, Cambodia, We attained ISO9001 which provides solid foundation for our further development. Persisting in "High quality, Prompt Delivery, Competitive Price", we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments. It is our great honor to meet your demands. We are sincerely expecting your attention.

In our cooperated wholesalers, this company has the best quality and reasonable price, they are our first choice.
