Factory best selling Nitchi Chain Hoist Manual - Hoist Chains – Dia 4mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong
Factory best selling Nitchi Chain Hoist Manual - Hoist Chains – Dia 4mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong Detail:
Category
Application
Lifting and lashing, loads lifting, loads binding, hoisting
Chain Parameter
Based on SCIC G80 & G100 lifting chain production technology, we well extend our product line to fine tolerance hoist chain Grade T (Types T, DAT & DT), for use in serial chain hoists manual and power driven.
Figure 1: hoist chain / links
Key
| 1 | Traverse centre line of the link | l | is the multiple pitch length |
| p | is the pitch | dm | is the material diameter as measured |
| ds | is the weld diameter | e | is the length dimensionally affected by welding |
| w3 | is the internal width at the weld | w2 | is the external width over the weld |
Table 1: hoist chain / link dimensions (mm)
|
Nominal size dn |
Material diameter tolerance |
Pitch |
Width |
Gaugelengthof 11xpn |
Weld diameter ds max. |
|||
|
pn |
tolerance1) |
internal w3 min. |
external w2 max. |
l |
tolerance1) |
|||
|
4 |
±0.2 |
12 |
0.25 |
4.8 |
13.6 |
132 |
0.6 |
4.3 |
|
5 |
±0.2 |
15 |
0.3 |
6.0 |
17.0 |
165 |
0.8 |
5.4 |
|
6 |
±0.2 |
18 |
0.35 |
7.2 |
20.4 |
198 |
1.0 |
6.5 |
|
7 |
±0.3 |
21 |
0.4 |
8.4 |
23.8 |
231 |
1.1 |
7.6 |
|
8 |
±0.3 |
24 |
0.5 |
9.6 |
27.2 |
264 |
1.3 |
8.6 |
|
9 |
±0.4 |
27 |
0.5 |
10.8 |
30.6 |
297 |
1.4 |
9.7 |
|
10 |
±0.4 |
30 |
0.6 |
12.0 |
34.0 |
330 |
1.6 |
10.8 |
|
11 |
±0.4 |
33 |
0.6 |
13.2 |
37.4 |
363 |
1.7 |
11.9 |
|
12 |
±0.5 |
36 |
0.7 |
14.4 |
40.8 |
396 |
1.9 |
13.0 |
|
13 |
±0.5 |
39 |
0.8 |
15.6 |
44.2 |
429 |
2.1 |
14.0 |
|
14 |
±0.6 |
42 |
0.8 |
16.8 |
47.6 |
462 |
2.2 |
15.1 |
|
16 |
±0.6 |
48 |
0.9 |
19.2 |
54.4 |
528 |
2.5 |
17.3 |
|
18 |
±0.9 |
54 |
1.0 |
21.6 |
61.2 |
594 |
2.9 |
19.4 |
|
20 |
±1.0 |
60 |
1.2 |
24.0 |
68.0 |
660 |
3.2 |
21.6 |
|
22 |
±1.1 |
66 |
1.3 |
26.4 |
74.8 |
726 |
3.5 |
23.8 |
|
1)These tolerances are usually divided into +2/3 and –1/3 for both the individual link and the standard gauge length. |
||||||||
Table 2: hoist chain working load limit (WLL)
|
Nominal size dn mm |
Chain type T t |
Chain type DAT t |
Chain type DT t |
|
4 5 6 |
0.5 0.8 1.1 |
0.4 0.63 0.9 |
0.25 0.4 0.56 |
|
7 8 9 |
1.5 2 2.5 |
1.2 1.6 2 |
0.75 1 1.25 |
|
10 11 12 |
3.2 3.8 4.5 |
2.5 3 3.6 |
1.6 1.9 2.2 |
|
13 14 16 |
5.3 6 8 |
4.2 5 6.3 |
2.6 3 4 |
|
18 20 22 |
10 12.5 15 |
8 10 12.5 |
5 6.3 7.5 |
|
mean stress N/mm2 |
200 |
160 |
100 |
Table 3: hoist chain manufacturing proof forces and breaking forces
|
Nominal size dn mm |
Manufacturing proof force (MPF) kN min. |
Breaking force (BF) kN min. |
|
4 |
12.6 |
20.1 |
|
5 |
19.6 |
31.4 |
|
6 |
28.3 |
45.2 |
|
7 |
38.5 |
61.6 |
|
8 |
50.3 |
80.4 |
|
9 |
63.6 |
102 |
|
10 |
78.5 |
126 |
|
11 |
95 |
152 |
|
12 |
113 |
181 |
|
13 |
133 |
212 |
|
14 |
154 |
246 |
|
16 |
201 |
322 |
|
18 |
254 |
407 |
|
20 |
314 |
503 |
|
22 |
380 |
608 |
Table 4: total ultimate elongation and surface hardness
|
|
hoist chain types |
||
|
T |
DAT |
DT |
|
|
Total ultimate elongation A %min |
10 |
10 |
5 |
|
Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
Site Inspection
Our Service
Product detail pictures:
Related Product Guide:
Attaining consumer satisfaction is our company's purpose without end. We will make wonderful endeavours to produce new and top-quality merchandise, satisfy your exclusive requirements and supply you with pre-sale, on-sale and after-sale services for Factory best selling Nitchi Chain Hoist Manual - Hoist Chains – Dia 4mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong, The product will supply to all over the world, such as: Roman, Botswana, Miami, With the development and enlargement of mass clients abroad, now we have set up cooperative relationships with many major brands. We have our own factory and also have many reliable and well-cooperated factories in the field. Adhering to the "quality first, customer first, We are provideing high-quality, low-cost products and first-class service to customers. We sincerely hope to establish business relationship with customers from all over the world on the basis of quality, mutually benefit. We welcome OEM projects and designs.
By Gwendolyn from Albania - 2018.06.21 17:11
The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
By Hedy from Kazakhstan - 2018.12.30 10:21
